How do you know it's time to resurface your pool?
Usually the finish tells you. If the surface feels rough on bare feet, shows stains that brushing will not lift, or has chips and bare patches, it is wearing out. Resurfacing is the repair that restores the surface and protects the concrete shell underneath.
Plaster does not last forever, and South Florida sun and heavy chemical use are hard on it. A pool that looks tired but is structurally sound is a good candidate. A pool that is losing water is a different problem, and we check for that first.
- Rough, sandpaper-like texture on the walls or steps
- Stains or dark blotches that do not respond to treatment
- Chips, hollow-sounding spots or exposed gray concrete
- Cracks in the finish, which can also point to a leak
- Etching or flaking, often after years of unbalanced water
Which finish should you choose: plaster, quartz or pebble?
All three go over the same prepared shell. The difference is texture, color depth and how the surface feels underfoot. Standard white plaster is the most economical. Quartz blends such as Diamond Brite add color and a harder surface. Pebble has the most texture and the most natural look.
We work with Florida Stucco Gem colors such as Sky Blue, Azure and Capri, along with quartz and pebble lines. Bring a photo of a pool you like and we can talk through how it will look once the water is in.
What does the resurfacing process involve?
The finish is the last layer of a longer job. Most of the quality is in the prep. The old surface is removed or sounded out, loose areas are repaired, and a bond coat goes on before the new finish. Tile, coping and lights are checked at the same time, because they are easiest to fix while the pool is empty.
Once the finish is applied, the pool is filled right away and the water is balanced. The first weeks matter. New plaster is soft, so brushing and water chemistry follow a set routine.
What should you know before the pool is drained?
In much of South Florida the water table is high, especially near the coast and the canals. An empty pool can be pushed up out of the ground by groundwater, which is called hydrostatic pressure. It can crack the shell or even lift it.
A pool should not be drained until someone checks the groundwater. Many pools have a hydrostatic relief valve, and we look for it and test it before pumping. If there is any doubt, we plan the draining around the weather and water level.
What affects the price of resurfacing in South Florida?
Price follows the size and shape of the pool, the finish you pick, and what the old surface needs. Quartz and pebble cost more than plaster. Hollow spots, cracked areas, new waterline tile and equipment work add to the scope.
Hurricane season, from June to November, can push the schedule because rain affects draining and finish work. We give you an itemized estimate with a clear total, so you can see what is included. Hidden underground conditions are quoted separately if they come up.
Options at a glance
How a pool resurfacing project runs
Free on-site estimate
We look at the pool, the finish and the equipment, then send an itemized estimate with a clear total.
Drain safely
We check groundwater and the hydrostatic relief valve before the pool is pumped down.
Prep the shell
The old surface is removed or repaired and tile, lights and fittings are checked.
Bond coat and finish
A bond coat goes on, then the new plaster, quartz or pebble is applied and finished.
Fill and fire-up
The pool is filled right away, the equipment is started and the water is balanced.
Curing and brushing
We explain the brushing and chemistry routine for the first weeks so the new surface cures well.
Where we do this work
We handle pool resurfacing across Palm Beach and Broward counties from our Boca Raton office, including Boca Raton, Delray Beach, Deerfield Beach, Pompano Beach, Parkland, Coral Springs, Fort Lauderdale, Davie, West Palm Beach, Boynton Beach, Hollywood and Miami.
